Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies Air Quality & Sanitizing in Marietta: What to Know First
We provide independent Abatement Technologies air quality and sanitizing in Marietta, with most scheduled jobs completed in a single visit and a written price delivered before any work starts. A typical whole-system treatment with documented photo record runs between $340 and $780 depending on the scope and what the camera finds inside your ductwork. This page is for homeowners running Abatement Technologies HEPA-AIRE, PREDATOR, or CAP series equipment who need mold treatment, bacteria sanitizing, odor removal, UV light installation, or allergen reduction - and who want the work photographed, priced in writing, and guaranteed for 365 days. Call (470) 516-9337 to schedule a free estimate.
How Abatement Technologies Products Fail - and How We Fix Them
- HEPA-AIRE PAS2400 portable air scrubbers: The blower motor seals degrade after roughly 1,800-2,200 runtime hours in Georgia’s high-humidity months, drawing unfiltered attic air back into the living space. We replace the seal kit with OEM-spec components and verify negative-pressure integrity with a manometer reading, documented in your photo record.
- PREDATOR 750 gas-powered vacuums: The cyclonic separator can clog with Georgia red-clay dust that bakes hard during summer attic conditions, reducing suction from 395 CFM to under 200 CFM without triggering any warning light. We disassemble and scope the separator, then treat the downstream duct run with a botanical sanitizer if microbial growth is present.
- CAP600-UV and CAP1200-UV central air purifiers: The 16-inch UV-C lamp sleeves cloud with hard-water scale from Marietta’s calcium-heavy municipal supply, cutting UV output by 40% before the lamp itself fails. We clean the quartz sleeve with a non-abrasive descaling agent rather than replacing the entire assembly, which preserves your warranty and costs roughly half of what a full lamp swap runs.
- Abatement Technologies HEPA filtration modules (H5000 series): The gasket interface between filter bank and housing compresses permanently after 18-24 months, creating a bypass path that defeats the HEPA rating. We measure the gap with a feeler gauge and install a compression-restoring gasket set - aftermarket, tested to the same durometer spec as OEM - rather than selling you a full filter bank you don’t need.
- PREDATOR line gas vacuums in winter: The Honda GX engine carburetor jets gum with ethanol-phase separation common in fuel stored through Marietta’s mild winters, causing hard starts that get misdiagnosed as ignition failure. We clean the jet, treat the fuel system, and scope the connected ductwork for condensation-related mold that the rough-running vacuum may have failed to extract properly.
Our Abatement Technologies Air Quality & Sanitizing Process
- 1
Written price delivered first. Haven Standard Clause 1: we inspect your Abatement Technologies equipment and ductwork with a camera scope, then deliver a written price before any panel comes off. No exceptions.
- 2
Model-specific diagnostic. We identify your exact Abatement Technologies series, check runtime hours if accessible, and photograph the plenum, each duct run, and the equipment interior. The camera doesn’t lie - and neither does the invoice.
- 3
Parts decision with documentation. OEM versus quality aftermarket is chosen based on warranty status, availability, and what the job actually requires. We note the part source on your written scope.
- 4
Treatment execution. Negative-pressure extraction, botanical or EPA-registered sanitizer application, UV lamp service, or air purifier install - performed with background-checked, uniformed technicians identified by name before arrival. Haven Standard Clause 3: Verified Crews.
- 5
Post-treatment verification. We re-scope critical duct runs and photograph the results. Your documented photo record is delivered as a standard deliverable, not an extra.
- 6
Written guarantee filed. The 365-Day Done Right Promise is backed in writing on every job. If it’s not right, we make it right.
BeforeAfterWhat Abatement Technologies Air Quality & Sanitizing Costs in Marietta
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Whole-system bacteria/mold sanitizing (single HVAC system) | $340-$520 | Number of duct runs, severity of buildup, accessibility of main trunk |
| UV-C lamp cleaning or replacement (CAP series) | $180-$340 | Sleeve condition, lamp wattage, whether housing gaskets need replacement |
| Standalone air purifier installation (Aprilaire/Honeywell/Abatement-compatible) | $420-$780 | Electrical requirements, return-air plenum modification, permit if needed |
| Odor removal with ozone or hydroxyl treatment | $280-$460 | Source location, square footage, whether ductwork replacement is required |
| Allergen reduction with HEPA upgrade | $260-$440 | Filter bank size, gasket condition, whether bypass sealing is needed |
These are whole-system prices, not per-vent teaser rates. The final number depends on what we find, not on what we hope you’ll pay before the upsell. Call (470) 516-9337 for a free estimate - we’ll put it in writing before any work starts.
Why Marietta Homeowners Call CleanRun Duct Cleaning Marietta for Abatement Technologies Work
We’ve served over 52,000 homes since 2013, every one with a written price before work started and a documented photo record when the crew left. The 365-Day Done Right Promise is backed in writing, not subject to manager approval. Our technicians carry Rotobrush, Nikro, and Abatement Technologies equipment on every truck, and when your system interfaces with Lennox, Trane, or Carrier components, we service those too - no subcontractor, no delay. Tomas Reyes and his crew have been the ones homeowners near the Marietta Square call when the HVAC tech says the ducts are the problem. We’re independently owned and operated under the Haven Standard, not a franchise, and we publish our license number where you can find it.
FAQs
No, if performed by a technician using manufacturer-specified parts and procedures. We document the parts source and method on your written scope so warranty claims remain valid. As an independent Abatement Technologies service provider, we have no manufacturer affiliation - we simply follow the service manual. Call (470) 516-9337 if you need warranty documentation for your records.
You receive a documented photo record of every duct run, before and after, as a standard deliverable on every visit. We also note the sanitizer product name, concentration, and dwell time on your written scope. If the photo doesn’t show a visible change, we explain why - sealed metal ductwork, for instance, won’t show staining removal because the surface was never stained. Call (470) 516-9337 and we’ll walk you through what to expect from your specific system.
The $79 coupon model relies on arriving with a shop vac and leaving with a $600 upsell for “mold treatment” that was never photographed or specified. We don’t do that. Haven Standard Clause 1 requires a written price before any work starts, every time. Our price is the price. Bring a competitor’s written estimate and we’ll provide a free second opinion, our number next to theirs.
Replacement makes sense when repair exceeds 60% of replacement cost or when the unit has exceeded its rated service life by more than three years. For Abatement Technologies portable units, that’s typically 6,000-8,000 hours; for CAP series central purifiers, 10-12 years. We put both numbers in writing and let you decide. Call (470) 516-9337 for an exact assessment.
Every three to five years for standard households, every two to three if you have pets, allergies, or a finished basement with below-grade ductwork that collects Georgia humidity. After heavy pollen seasons or any water intrusion event, a scoped inspection is worth the call. We don’t sell maintenance plans - we scope, photograph, and tell you what we see. Call (470) 516-9337 to schedule.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Marietta at CleanRun Air Duct Cleaning Marietta, serving Marietta and nearby areas.