Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies HVAC Cleaning in Marietta: What to Know First
We provide independent Abatement Technologies HVAC cleaning in Marietta for homeowners who want the work documented, not just promised. Most Abatement Technologies systems we service in Cobb County run between $340 and $620 for a full air handler, coil, and blower cleaning, depending on access and contamination level. Every job starts with a written price before we touch a single panel, and every run is photographed before and after.
This page is for owners of Abatement Technologies air scrubbers, HEPA filtration units, and portable remediation equipment who need the HVAC side of their system cleaned by technicians who know the brand’s pressure-drop characteristics and filter-sealing geometry. We also clean the central HVAC components that Abatement Technologies equipment protects. Call (470) 516-9337 for a free written estimate.
How Abatement Technologies Products Fail - and How We Fix Them
- BD2 Series negative air machines: The blower wheel cakes with Georgia clay dust and drywall particulate after remediation jobs in Marietta’s older East Cobb homes. We remove the wheel, soak it in enzyme cleaner, and balance-test before reinstall - not just blow it off with compressed air. The camera shows the difference between surface-clean and actually clean.
- PRED750 and PRED1200 air scrubbers: The pleated pre-filter housing warps from heat cycling in unconditioned Marietta crawl spaces, creating bypass gaps that let dirty air hit the HEPA. We inspect the seal track with a borescope and replace the housing if the latch points are fatigued. Quality aftermarket housings run about 40% less than OEM and carry the same 2-year warranty.
- HEPA-CARE HC500 and HC800 units: The evaporator coil fins flatten from improper filter changes - homeowners force a wrong-size filter and bend the leading edge. We comb the fins with a specialized tool and treat with foaming cleaner that won’t degrade the aluminum, then photograph the fin spacing so you can verify the repair.
- Abatement Technologies PAS2400 portable air scrubbers: The blower motor bearing fails prematurely when the unit runs continuously during Marietta’s high-humidity summers without grease service. We pull the motor, regrease with high-temp bearing pack, and test amp draw against the nameplate. If the bearing race is scored, we quote a replacement motor before ordering - Haven Standard Clause 1, written price first.
- Filter housings on AIRE GUARD 3 and 4 series: The gasket channel traps condensation from our local temperature swings, breeding mold that blows downstream. We remove the channel, clean with botanical disinfectant, and replace the gasket with closed-cell neoprene that won’t wick moisture. The photo record shows the channel condition before we close it up.
Our Abatement Technologies HVAC Cleaning Process
- 1
System shutdown and written scope. We power down the unit, verify lockout-tagout, and deliver a written price covering every component we’ve scoped - Haven Standard Clause 1. No work starts until you sign.
- 2
Borescope diagnostics. We run a camera through the plenum (the main distribution box) and each accessible duct run, documenting debris depth, coil fin condition, and any seal failures. You see what we see in real time.
- 3
Component removal and cleaning. For Abatement Technologies blowers, we remove the wheel assembly rather than cleaning in-place - the housing geometry traps debris behind the squirrel cage that no spray-and-rinse reaches. Coils get foaming cleaner, dwell time, and low-pressure rinse to protect fin integrity.
- 4
OEM vs. aftermarket parts decision. When a part needs replacement - gasket, bearing, housing - we quote both options with the warranty term for each. Abatement Technologies OEM filters seal tighter; quality aftermarket housings from Guardsman fit correctly at lower cost. You choose; we document the choice in writing.
- 5
Reassembly and pressure test. We reassemble, check amp draw on the blower motor, verify static pressure across the coil, and run the unit through a full cycle. Abnormal readings mean we reopen and find the cause - no “good enough” departures.
- 6
Photo record delivery and warranty. You receive before-and-after photos of every component we touched, plus the written 365-Day Done Right Promise. If the work isn’t right, we make it right - backed in writing, not subject to manager approval.
BeforeAfterWhat Abatement Technologies HVAC Cleaning Costs in Marietta
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Air handler & blower cleaning (BD2, HC500 series) | $340 - $480 | Wheel removal required; bearing condition; access panel clearance |
| Evaporator coil cleaning with fin treatment | $280 - $420 | Coil location (attic vs. closet); contamination depth; fin damage |
| Full system cleaning (blower, coil, plenum, registers) | $520 - $620 | Number of duct runs; HEPA housing seal replacement; motor grease service |
| Filter housing gasket replacement (OEM) | $90 - $140 | Housing size; gasket material specified by model |
| Blower motor bearing regrease or replacement | $180 - $340 | Motor accessibility; bearing size; OEM vs. aftermarket motor |
These are whole-system prices - no per-vent add-ons, no trip-charge surprises. The price we write is the price you pay. Call (470) 516-9337 for an exact quote on your Abatement Technologies unit; estimates are free and delivered in writing before any work begins.
Why Marietta Homeowners Call CleanRun Air Duct Cleaning Marietta for Abatement Technologies Work
We’ve cleaned Abatement Technologies equipment in Marietta since 2013 - from remediation sites near the Square to new construction in West Cobb where the HEPA units ran through drywall season. Tomas Reyes and our crew know the pressure-drop specs that matter for this brand, and we carry the filter sizes that fit without forcing.
The 365-Day Done Right Promise applies to every job, not just the easy ones. Our technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews, and we identify them by name before arrival. We also service Lennox, Trane, and Carrier systems - so when your Abatement Technologies air scrubber ties into a mixed-manufacturer HVAC setup, we don’t guess at the integration.
The camera doesn’t lie - and neither does the invoice. Every customer gets the photo record, every time.
FAQs
No - Abatement Technologies warranties cover manufacturing defects, not maintenance or cleaning. However, neglecting recommended coil and blower cleaning can void warranty coverage for downstream failures, since the manufacturer can document restricted airflow as the root cause. We provide a written service record with every cleaning that satisfies warranty maintenance documentation requirements. Call (470) 516-9337 to schedule.
OEM filters seal to the housing specification and maintain the rated pressure drop; aftermarket filters vary in pleat count and gasket density. We stock both, quote the MERV rating and pressure-drop spec for each, and let you decide. If your unit runs in a high-particulate environment - common in Marietta’s active construction zones - the tighter OEM seal often pays for itself in motor longevity. We bring samples to the estimate so you can compare before signing.
Our Documented Photo Record shows the inside of every component we touch - blower wheel before and after, coil fins before and after, plenum walls, filter housing gasket seat. These photos are timestamped and delivered as part of your job record. If we can’t photograph it, we didn’t clean it, and we don’t charge for it. Haven Standard Clause 4: Verified Outcomes.
A grinding noise usually indicates blower wheel imbalance or bearing failure, not routine contamination. We scope it first - if the wheel is cracked or the bearing race is scored, cleaning won’t fix it, and we’ll quote the replacement part in writing before ordering. If it’s debris buildup causing imbalance, cleaning resolves it. We don’t sell you a replacement you don’t need. Call (470) 516-9337 and we’ll diagnose before quoting.
For residential units in Marietta’s pollen-heavy spring and high-humidity summer, we recommend blower and coil cleaning every 2-3 years for standard households, annually if you run continuous remediation or have multiple pets. Abatement Technologies HEPA units working in construction or water-damage environments need filter and pre-filter inspection every 6 months. We date-stamp our photo records so you can track buildup over time and schedule based on evidence, not a calendar.
Ready for a written estimate on your Abatement Technologies system? Call (470) 516-9337. We’ll scope the unit, name the price, and show you what we found - before any work starts.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Marietta at CleanRun Air Duct Cleaning Marietta, serving Marietta and nearby areas.