Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Marietta, GA | CleanRun Air Duct Cleaning Marietta
Air Duct Cleaning in Marietta for Trane systems typically runs $380-$620 for a complete residential system, and every job starts with a camera inspection before any brush touches the ductwork. We’re an independent Trane service provider - not authorized or endorsed by the manufacturer - and we’ve spent over a decade working on Trane equipment in the specific conditions that Cobb County attics create. Call (470) 516-9337 for a written estimate before any work begins.
Why Marietta Residents Choose Us for Trane Service
We’ve pulled apart enough Trane cabinets in Marietta to know the difference between an XR14 air handler and a ComfortLink II communicating system without reading the nameplate. That familiarity matters when the duct board plenum behind a Trane unit has been baking in a Georgia attic since the Reagan administration.
Tomas Reyes, our owner, grew up in the Bronx and cut his teeth on airflow systems at Bronx Community College before deciding this was the puzzle worth solving. He and our crew have become the ones homeowners near the Marietta Square call when the HVAC tech says the ducts are the problem. Tomas arrives with a camera scope and leaves customers with before-and-after photos they can actually read - no vague summaries, no upsell theatre. The camera doesn’t lie - and neither does the invoice.
We stock OEM Trane-spec collars and mastic-rated sealants for the connections that matter, and we use quality aftermarket flex duct and insulation for general branch replacement. Every job is quoted with a written price before work starts, backed by our 365-Day Done Right Promise. Our equipment roster includes Rotobrush, Nikro, Abatement Technologies, Honeywell, Aprilaire, and Guardsman - brands you can look up yourself before you agree to anything.
Common Trane Air Duct Cleaning Problems We Solve in Marietta
- Duct board plenum delamination in Trane systems. The original plenum boxes in Marietta’s 1970s-1990s ranches and colonials separate along interior seams after decades of cycling between 130-140°F attic heat and AC-cooled airflow. Later Trane air handlers move more static pressure through these plenums and accelerate fiberglass shedding. We camera-inspect first, then rebuild with sealed board if needed.
- Flex duct branches pulling loose from Trane air handler collars. Decades in unconditioned attics cause sagging, kinking, or complete disconnection. This drops airflow to specific rooms and lets attic dust - Georgia red-clay dust, in Marietta’s case - into the supply side. We reconnect and mastic-seal using Haven Standard Clause 1 pricing.
- Biological growth in Trane cased coils. Marietta’s year-round humidity keeps evaporator coils wet for months at a time, feeding mold and mildew that gets pulled into supply ducts during cooling season. We clean the coil and blower as part of full system service, not as a separate upsell.
- Variable-speed blowers masking restriction. Trane ComfortLink II and XV systems run at low static pressure through dirty filters and return ducts, hiding airflow problems until the coil or heat exchanger is already stressed. Our camera finds what the blower’s adaptability has been covering up.
- Pollen caking on duct interiors. Atlanta-area monitoring stations record oak and pine pollen counts 5-10 times the national “very high” threshold each spring. Marietta’s humidity causes this pollen to adhere to duct surfaces faster than in drier metros, creating buildup that standard filters never catch.
BeforeAfterTrane Service in Marietta: What Local Conditions Mean for Your Equipment
In the post-1970s neighborhoods along the US-41 corridor and near the Franklin Road area, we regularly encounter a failure pattern that doesn’t show up in newer-stock markets: the original duct board plenum boxes on Trane systems have developed interior liner separation, not just dirt accumulation. This isn’t a cleaning problem - it’s a structural degradation problem caused by Marietta’s specific combination of 130-140°F attic temperatures and decades of thermal cycling.
Here’s why this matters for Trane owners specifically. Trane’s XR-series and later air handlers are engineered to move higher static pressure through the duct system than the builder-grade units these homes originally had. When a delaminating plenum is subjected to that increased pressure, the separation worsens and fiberglass particles enter the airstream. A standard rotary brush operation on a plenum in this condition doesn’t clean it - it accelerates the damage.
Our procedure in Marietta is camera-first, always. We run a video inspection through every duct run before selecting equipment or setting a scope. If the camera shows delamination, we shift from cleaning to rebuilding. This is a specific protocol we developed for Cobb County’s housing stock, not a generic approach applied everywhere.
Trane Models & Products We Service in Marietta
We work on Trane XR series units (XR14, XR15, XR16) and their matching air handlers, the older XB builder-grade lines (XB13, XB14), ComfortLink II and XV variable-speed communicating systems, and Trane Tempo and Ameristar ducted systems. We also service the associated ductwork, plenums, and registers regardless of the original installer.
Our van stocks OEM Trane-spec collars and mastic-rated sealants for the connection points where exact fit prevents air leakage. For general flex duct and insulation replacement, we use quality aftermarket materials that meet or exceed the original specifications. We don’t push manufacturer-authorized status because we aren’t - we’re independent, and we think that’s an advantage when it comes to honest repair-versus-replace advice. A $500 duct repair on a 25-year-old Trane system is rarely the right call; we’ll tell you that in writing before you spend anything.
Trane sales & service across our full coverage area uses the same equipment and the same camera-first protocol.
Trane Service Pricing in Marietta
Complete Trane air duct cleaning in Marietta runs $380-$620 for most residential systems, depending on the number of duct runs, the accessibility of the plenum, and whether we find delamination or other structural issues during the camera inspection. This is a flat price per system, agreed in writing before work starts - no per-vent add-ons, no equipment surcharges, no “we found something unexpected” invoices.
Every estimate includes the full camera inspection, the Documented Photo Record of every duct run before and after, and the 365-Day Done Right Promise in writing. If we need to rebuild a plenum or replace flex branches, that scope and price are added to the written agreement before any cutting begins.
Call (470) 516-9337 for an exact quote - estimates are free, and we put our number next to any competitor’s written estimate under our Free Second Opinion policy.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Trane Air Duct Cleaning in Marietta
Yes. Homes from that era in Marietta frequently have duct board plenums that have delaminated after decades in 130-140°F attic heat. Brushing a delaminating plenum releases fiberglass fibers into your airstream. We run the camera first on every 1970s-1990s Marietta home, no exceptions. Call (470) 516-9337 to schedule - the inspection itself is part of our standard estimate process.
Trane’s variable-speed blowers on ComfortLink II and XV systems adapt to restriction rather than alerting you to it, which means dirty ducts can go undetected until the coil or heat exchanger is stressed. We account for this by measuring static pressure before and after cleaning, not just running a brush through and calling it done. The equipment brand doesn’t change our core protocol, but it does change what we measure to verify results.
Marietta sits in one of the worst seasonal pollen corridors in the United States. The Atlanta metro’s dense loblolly pine and oak canopy produces airborne loads 5-10 times the national “very high” threshold, and our humid subtropical climate causes that pollen to cake onto duct surfaces rather than passing through. Mold and dust mite growth persist year-round because ductwork moisture levels stay elevated even in air-conditioned homes. This isn’t marketing exaggeration - it’s what our cameras show every March and September.
Yes, and we typically recommend it. Trane cased coils in Marietta stay wet for much of the year due to local humidity, which feeds biological growth that migrates into supply ducts. Cleaning ducts without addressing the coil leaves a contamination source in place. We scope the coil during our initial camera inspection and include it in the written scope if needed.
It depends on what the camera shows and what the system’s overall condition is. If the ductwork is structurally sound and the air handler has reasonable life left, cleaning extends performance. If we find plenum delamination, refrigerant leaks, or a failing heat exchanger, we’ll recommend putting the duct repair budget toward replacement - and we’ll put that in writing, not pressure you into either option. Call (470) 516-9337 and we’ll give you a straight assessment.
Service Areas Near Marietta
We run Trane service calls throughout Cobb County and into adjacent markets. Our regular routes include Marietta service area proper, plus Trane service in Smyrna, Trane service in Kennesaw, Sandy Springs, Woodstock, and Roswell. The same camera-first protocol and written pricing apply everywhere we travel.
Book Your Trane Service in Marietta Today
Call (470) 516-9337 to schedule a free estimate. A live person answers, 24/7. We’ll send a background-checked, uniformed technician identified by name before arrival. You’ll get a written price before any work starts, a Documented Photo Record of every duct run, and the 365-Day Done Right Promise in writing - the same standard we’ve held since 2013.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Marietta since 2013.