Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAir Duct Cleaning in Roswell, GA
Complete HVAC cleaning in Roswell typically runs $380-$680 for a single system and $720-$1,200 for dual-system homes, with air quality and sanitizing services adding $220-$450 depending on scope. We’re CleanRun, and we’ve built our work in Roswell around the reality of what sits inside these 30- to 40-year-old duct systems: original builder-grade fiberglass duct board degrading in hot, humid attics, documented with before-and-after photos on every job. Call (470) 516-9337 for a written price before any work starts.
Why Roswell Homes Are Different
Roswell’s residential core was built in a concentrated window, roughly 1985 to 1998, and the result is a city full of large homes now hitting a critical degradation point all at once. Subdivisions like Horseshoe Bend, Edenwilde, and Martins Landing are dominated by 2,500-4,500 square foot homes with two or more HVAC systems and long flex-duct runs through unconditioned attics. The original duct board in many of these systems is at or past its rated service life.
The Chattahoochee River forms Roswell’s western and southern boundary, and that river corridor holds humidity higher than inland northern suburbs. In summer, attic temperatures climb while relative humidity stays elevated, accelerating microbial growth inside duct systems. Roswell also sits in one of the highest pollen-load zones in the Atlanta metro, and the city’s mandated tree canopy of pine, oak, and sweet gum drives heavy seasonal infiltration through return-air systems. Technicians working Horseshoe Bend and other river-adjacent subdivisions regularly find crawl-space flex duct that has absorbed ground moisture wicking up from the floodplain, causing outer jacket separation and mold colonization of the inner liner.
Our Main Roswell Services
Three services account for most of our calls from Roswell homeowners. Each has its own dedicated page with full pricing and scope details.
Air Duct Cleaning in Roswell
We clean the complete supply and return network, from plenum to register, using negative-pressure extraction with Rotobrush and Nikro equipment. In Roswell, this means addressing 30- to 40-year-old fiberglass duct board with degraded liner, especially in multi-system homes where long flex-duct runs trap debris at elbows. Every run is photographed before and after. Read more about Air Duct Cleaning in Roswell.
Dryer Vent Cleaning in Roswell
Dryer vent blockages in Roswell’s large homes often involve runs exceeding 25 feet through multiple elbows, with lint compaction that standard brushes can’t clear. We use professional-grade rotary whips and camera verification to confirm full airflow restoration. Every job includes a written airflow measurement before and after. Read more about Dryer Vent Cleaning in Roswell.
Duct Repair & Sealing in Roswell
Roswell’s aging flex duct and degraded duct board require more than cleaning. We replace collapsed or separated runs, seal plenum connections with mastic, and address the moisture-damaged crawl-space flex common in Chattahoochee-adjacent subdivisions. All repair work carries the 365-Day Done Right Promise. Read more about Duct Repair & Sealing in Roswell.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterHVAC Cleaning in Roswell
HVAC cleaning in Roswell addresses a specific problem set: evaporator coils fouled with pollen and microbial growth, blowers coated in fine dust from degraded duct board, and condensate pans breeding bacteria in high-humidity attics. The 30- to 40-year-old systems common in Horseshoe Bend and Edenwilde were sized for the house as built, not for today’s envelope tightness or occupancy patterns, which means coils run longer and collect more debris between cycles. Our HVAC Cleaning service targets these components directly, with documented photo records of each element before and after treatment.
Evaporator Coil Cleaning
Signs you need it
Ice formation on the coil, reduced airflow at registers, or a musty odor when the system cycles on in Roswell’s humid summers.
What it costs in Roswell
Evaporator coil cleaning in Roswell typically ranges from $180 to $320 for a single system.
How we do it
We remove the coil access panel, apply foaming cleaner from Abatement Technologies, rinse with low-pressure water, and photograph the coil surface before and after.
Blower Cleaning
Signs you need it
Uneven heating or cooling across zones, higher-than-expected energy bills, or visible dust puffing from registers when the fan starts.
What it costs in Roswell
Blower cleaning in Roswell typically ranges from $150 to $280 per air handler.
How we do it
We remove the blower assembly, clean the wheel and housing with compressed air and contact cleaner, balance the assembly, and reinstall with torque verification.
What HVAC Cleaning Costs in Roswell
| Item | Typical range in Roswell |
|---|---|
| Single-system HVAC cleaning (coil, blower, condensate pan) | $380-$680 |
| Dual-system home, both units cleaned | $720-$1,200 |
| Condenser cleaning (outdoor unit only) | $120-$220 |
How do I know my HVAC was actually cleaned?
Every component is photographed before and after, and those images are delivered with your job record. Haven Standard Clause 2 requires the photo record on every visit, so you see the coil, blower, and pan condition directly rather than taking anyone’s word for it.
Why does HVAC cleaning cost more in Roswell than newer suburbs?
Multi-system homes with long attic runs require more technician time and specialized equipment access. A 4,000-square-foot home in Martins Landing with three systems takes roughly triple the labor of a single-system ranch in a newer development.
Air Quality & Sanitizing in Roswell
Air quality and sanitizing in Roswell targets the microbial load that builds in 30- to 40-year-old duct systems operating in high-humidity conditions. The Chattahoochee corridor’s elevated moisture, combined with original fiberglass duct board whose liner has degraded, creates an environment where mold and bacteria colonize supply plenums and trunk lines. Our Air Quality & Sanitizing service uses EPA-registered products and application methods documented with before-and-after photos.
Mold Treatment
Signs you need it
Visible dark staining on registers or duct board, a persistent earthy odor when the system runs, or allergy symptoms that worsen at home in Roswell’s humid months.
What it costs in Roswell
Mold treatment in Roswell typically ranges from $280 to $520 for a single system.
How we do it
We apply an EPA-registered antimicrobial through the duct network using a fogging system, allow proper dwell time, and verify coverage with UV-cure tracer dye visible in the photo record.
UV Light Installation
Signs you need it
Recurring microbial growth after cleaning, high humidity readings in the plenum, or occupants with respiratory sensitivities in a home with degraded duct board.
What it costs in Roswell
UV light installation in Roswell typically ranges from $320 to $580 per air handler, including the Honeywell or Aprilaire unit and electrical connection.
How we do it
We mount a UV-C lamp in the supply plenum, wire to the blower circuit for automatic operation, and verify irradiance levels with a meter reading recorded in your job file.
What Air Quality & Sanitizing Costs in Roswell
| Item | Typical range in Roswell |
|---|---|
| Mold treatment, single system | $280-$520 |
| Bacteria sanitizing with EPA-registered product | $220-$380 |
| UV light installation (Honeywell/Aprilaire) | $320-$580 |
Is the sanitizing product safe for children and pets?
We use only EPA-registered antimicrobials labeled for HVAC application, applied with the system off and fully ventilated before restart. The product specification sheet is included in your job record.
How long does mold treatment take to work?
The antimicrobial begins working on contact; visible staining may remain as it is often embedded in degraded fiberglass liner. We photograph the treated areas so you can compare regrowth, or its absence, at your next scheduled maintenance.
Brands We Service in Roswell
We stock parts and service equipment from Honeywell, Aprilaire, and Abatement Technologies, with filter media and UV replacement bulbs carried on every Roswell truck for same-visit resolution. See our brands for the full equipment roster.
Pricing for Air Duct Cleaning in Roswell, GA
| Service | Typical range in Roswell |
|---|---|
| Single-system air duct cleaning | $320-$580 |
| Dual-system home, both cleaned | $580-$980 |
| Evaporator coil cleaning | $180-$320 |
| Blower cleaning | $150-$280 |
| Condenser cleaning | $120-$220 |
| Dryer vent cleaning (standard run) | $140-$240 |
| Mold treatment, single system | $280-$520 |
| Bacteria sanitizing | $220-$380 |
| UV light installation | $320-$580 |
| Duct repair (per run, materials and labor) | $180-$340 |
Prices increase in Roswell when homes have three or more systems, crawl-space access requiring additional safety protocols, or duct board degradation requiring section replacement rather than cleaning alone. Every price is written and agreed before work begins, per Haven Standard Clause 1.
Neighborhoods We Serve in Roswell
Our crews work throughout Roswell’s established subdivisions, with scheduling coordinated from our Atlanta office and dispatch to all areas within one business day. Representative neighborhoods include:
- Horseshoe Bend
- Edenwilde
- Martins Landing
- Willow Springs
- Country Club of Roswell
Service Area - Cities Near Roswell
CleanRun serves homeowners throughout northern metro Atlanta, with regular work in Alpharetta, GA, Woodstock, GA, Marietta, GA, and Holly Springs, GA. Scheduling and dispatch are coordinated from our Atlanta office; crews serve each city locally with the same equipment roster and documentation standards.
Serving Roswell, GA - Our Local Coverage Area
We’re based in the Roswell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Roswell
Roswell does not require permits for cleaning or non-structural duct repair. Full duct replacement or modifications to the HVAC chase may require a permit through the city’s Community Development office; we handle permit documentation when our scope includes replacement work.
We typically schedule Roswell appointments within 2-4 business days. Emergency mold or water-damage situations are triaged same-day when health concerns are present. All calls are answered by a live person who can confirm availability.
Roswell HOAs generally do not restrict indoor HVAC work. Technicians arrive in marked, professional vehicles and carry background-check documentation. We can provide a certificate of insurance or scope letter for your HOA manager on request, per Haven Standard Clause 3: Verified Crews.
What happens when you call
- 1A real person answersNo phone trees - talk to a local air duct cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Roswell Customers Say
"They found a disconnected duct in the crawl space that had been dumping conditioned air under the house for years. Photographed it, quoted the repair, fixed it."
- Devon A."Flat price agreed up front, no per-vent add-ons at the end. That was the whole reason I did not call the coupon company."
- Suzanne B."My allergies genuinely improved. They also told me the ducts did not need sealing, which I had been quoted for elsewhere."
- Petra K.